How Do I Remove My Smoke Alarm?
Note: You may need to remove your alarm to find your model number or replace the alarm or batteries.
Important: If the tamper-resist feature is activated, disengage it before removing the alarm from the wall or ceiling.
Removing a Battery-Operated Alarm
To remove a battery-operated alarm from the trim ring, rotate the alarm in the direction of the OFF arrow on the cover.
Removing an AC Hard-Wired or Interconnected Alarm
- Remove the alarm from the trim ring by rotating it counter-clockwise, in the direction of the OFF arrow on the cover.
- Disconnect the AC power harness by squeezing the locking arms on the sides of the quick connector while pulling the connector away from the bottom of the alarm.
Disengaging the Tamper-Resistant Features
Most alarms come with an optional tamper-resist feature to prevent unwanted removal. Some alarms use a tamper-resist pin, while others use a locking tab mechanism.
- Tamper-Resist Pin: Using a pair of long nose pliers, pull the pin out of the hole.
- Tamper-Resist Tab: Press down on the tamper-resist tab and rotate the alarm towards the OFF arrow.
For more information about your specific alarm, refer to your user’s manual.
Need Further Assistance?
If you have any questions or need further assistance, please don't hesitate to contact our customer care team.
They are available to help you with any concerns or inquiries you may have. Reach out to us for support, and we'll be happy to assist you!